Saudi Engineering Shifts Active (AST (UTC+3) 24/7)

MATLAB & Simulink Engineering Consulting in Saudi Arabia

Applied numerical simulation, control system design, and algorithmic modeling for Saudi Arabian industrial plants, utility operators, and research institutes.

Core Simulation and Engineering Capabilities:
Simulink & Simscape Control Systems (PID / MPC) Digital Signal Processing (DSP) Power Electronics & EV Deep Learning & Computer Vision Numerical Optimization
Video Proof Included Clean Vectorized Code Strict Non-Disclosure (NDA)
MATLAB R2024b — Automated Verification Test Runner
100% PASS
>> run('control_system_model.m')
% Initializing State-Space & ODE Solvers...
[OK] Model compiled in 0.042s. Eigenvalues stable in LHP.

>> run_verification_test_suite()
   Test 1: Step Response Rise Time < 0.20s ... PASSED
   Test 2: Phase Margin > 45.0° (Gain Margin: Inf) ... PASSED
   Test 3: Steady-State Error = 0.000 ... PASSED

All Verification Tests Passed (Simulation Converged: 100%)
Screen-Recorded Video Proof Included Automated execution logs, test benchmarks & video proof included.
Submit Project Specifications & Request Feasibility Review →

Industrial and Applied Research Engineering in Saudi Arabia

Engineering solutions addressing national power grid expansion, mega-project renewable microgrids, and petrochemical process optimization.

RENEWABLE GRIDS

Utility Solar & Weak-Grid Stabilization

Grid-forming inverter modeling, synthetic inertia injection, and Saudi Electricity Company (SEC) grid code compliance simulations.

PETROCHEMICALS

Reactor Kinetics & Column Control

Polymerization reactor thermal run-prevention, multivariable fractionation control, and non-linear valve hysteresis modeling.

SEAWATER DESALINATION

High-Recovery Reverse Osmosis

Pressure vessel hydraulic transients, energy recovery device (ERD) efficiency curves, and dynamic chemical dosing models.

HYDROGEN ENERGY

Green Hydrogen & Electrolyzer Dynamics

Proton exchange membrane (PEM) electrolyzer cell voltage calculations, intermittent solar power buffering, and compression dynamics.

Kingdom of Saudi Arabia Engineering Focus

Specialized Simulation & Algorithm Consulting for KSA

Custom MATLAB and Simulink development aligned with Vision 2030 industrial transformations, SEC grid requirements, SABIC petrochemical systems, and top Saudi research institutions.

Grid Interconnects & Solar SEC Code Verified

SEC 380kV & 110kV Transmission Grid Compliance

We simulate utility-scale photovoltaic integration, active/reactive power control, low-voltage ride-through (LVRT), and frequency response under the Saudi Electricity Company (SEC) Transmission Grid Code using Simscape Electrical and MATLAB power system toolboxes.

Key Deliverables: Harmonics IEEE 519 compliance reports, reactive power P-Q capability charts, and dynamic RMS/EMT transient stability scripts.
Downstream & Petrochemicals Aramco / SABIC Standards

Fractionation Columns, Flares & Catalytic Reactor Kinetics

Multivariable process control modeling for refinery fractionation columns, non-linear reaction kinetics for ethylene/propylene synthesis, and flare gas recovery systems. We formulate stiff differential equations and solve them using validated ode15s and ode23tb routines.

Key Deliverables: State-space matrices, Model Predictive Control (MPC) scripts, and thermal runaway boundary envelopes.
Water & Desalination SWCC Aligned

SWCC Seawater Reverse Osmosis & Hydraulic Transients

Detailed thermal-hydraulic modeling of high-pressure seawater reverse osmosis (SWRO) membrane trains, isobaric energy recovery devices (ERDs), and pump trip water hammer transients using Simscape Fluids and custom numerical solver blocks.

Key Deliverables: Dynamic pressure profiles, specific energy consumption (kWh/m³) optimization curves, and membrane fouling state models.
Saudi Graduate Research KFUPM / KAUST / KSU

Post-Graduate Thesis Formulation & Simulation Proofs

Comprehensive algorithm development for Master's and PhD candidates at King Fahd University of Petroleum and Minerals (KFUPM), King Abdullah University of Science and Technology (KAUST), and King Saud University (KSU) across robotics, deep learning, and advanced control.

Key Deliverables: Commented MATLAB .m and .slx files, mathematical derivation LaTeX reports, and milestone video proof of runs.

Saudi Engineering Verification & Standards Protocol

Every algorithm and Simulink block is developed according to SASO regulations, Saudi Aramco Engineering Standards (SAES), and SEC compliance criteria.

SEC Grid Code Compliance Testing

We run automated dynamic simulations verifying low-voltage ride-through (LVRT), continuous reactive power supply, and frequency response against Saudi Electricity Company standards.

SAES & SASO Instrument Calibration

Sensors, actuators, and valve characteristics are modeled with saturation, backlash, and deadband limits conforming to Saudi Aramco Engineering Standards (SAES-J series).

Stiff Solvers for Desert Thermal Extremes

We configure specialized numerical ode15s/ode23tb solvers to eliminate zero-crossing divergence and simulate equipment heat dissipation under 52°C ambient Arabian desert conditions.

HIL & Embedded Coder Deployment

We generate production-grade, MISRA-C compliant C/C++ code from Simulink models for rapid Hardware-in-the-Loop (HIL) testing and PLC target execution in Saudi industrial installations.

AST Timezone Video Demonstrations

Each project milestone includes an English or Arabic narrated screen-recorded video walkthrough showing live parameter changes, solver executions, and validation plots delivered in AST (UTC+3).

Strict Academic & Corporate NDA

We sign formal non-disclosure agreements with Saudi university researchers and engineering consultants, ensuring proprietary plant telemetry and research formulations remain 100% confidential.

Frequently Asked Questions (Saudi Arabia)

Key information regarding MATLAB consulting, payments, and deliverables for clients across the Kingdom of Saudi Arabia.

We build high-fidelity Simscape Electrical models to simulate grid-forming inverters, synthetic inertia, low-voltage ride-through (LVRT), and reactive power capability curves to verify compliance with SEC Transmission and Distribution Grid Codes for solar PV and wind plants.

Yes. Our doctoral chemical engineering consultants formulate coupled differential equations for catalytic cracking, tubular polymerization reactors, and multivariable distillation column MPC control in MATLAB, verified with rigorous numerical stiff solvers (ode15s).

We provide doctoral-level mathematical derivation, algorithm formulation, and Simulink model verification for post-graduate researchers across Saudi universities, including complete commented .m files and screen-recorded video execution demonstrations.

We accept payments in Saudi Riyals (SAR) or USD via direct corporate bank transfer, credit card, and PayPal, with formal milestone agreements and tax-compliant invoices.

All industrial datasets, plant schematics, and simulation models are handled under strict bilateral Non-Disclosure Agreements (NDAs) with zero cloud logging and isolated workstation execution.

Need Technical MATLAB or Simulink Engineering Support?

Consult our doctoral engineering lab to discuss model architecture, algorithm formulation, or solver convergence troubleshooting for your project in Saudi Arabia.

Request Technical Consultation →
Strict non-disclosure protection and prompt review within 15 minutes.